The nyquist sampling theorem is a cornerstone of analog to digital conversion. It posits that to adequately preserve an analog signal when converting to digital, you have to use a sampling frequency twice as fast as what a human can sense. This is part of why 44.1 khz is considered high quality audio, even though the mic capturing the audio vibrates faster, sampling it at about 40k times a second produces a signal that to us is indistinguishable from one with an infinite resolution. As the bandwidth our hearing, at best peaks at about 20khz.
I’m no engineer, just a partially informed enthusiast. However, this picture of the water moving, somehow illustrates the nyquist theorem to me. How perception of speed varies with distance, and how distance somehow make things look clear. The scanner blade samples at about 30hz across the horizon.
Scanned left to righ, in about 20 seconds. The view from a floating pier across an undramatic patch of the Oslo fjord.
*edit: I swapped the direction of the scan in OP
So… what is Dayquist?
The fighter of the Nyquist.
Makes sense.
Champion of the sun!
Master of karate!
That’s really cool, the water looks like a Fourier transform.
Little nitpick. Nyquist frequency is at least 2x the maximum frequency of the signal of interest.
The signal of interest could be something like ~20kHz (human hearing or thereabouts) or it could be something like a 650 kHz AM radio signal.
Nyquist will ensure that you preserve artifacts that indicate primary frequency(ies) of interest, but you’ll lose nuance for signal analysis.
When we’re analyzing a signal more deeply we tend to use something like 40x expected max signal frequency, it’ll give you a much better look at the signal of interest.
Either way, neat project.
I’ll add that frequencies above the Nyquist point fold into lower frequencies. So you need to filter out the higher frequencies with a low pass filter.
This isn’t just for audio but any type of sampling frequencies. For example in video when you see wagon wheels going backwards, helicopter blades moving slowly, or old CRT displays where there is a big bright horizontal line sweeping. That’s all frequency folding around half the frame rate.
It also applies to grids in images. The pixels in a display act a sample points and you get frequency folding leading to jagged lines. Because a line segment is a half cycle of a square wave with a period of twice the length.
When that segment is diagonal it become a two dimensional signal with even higher frequency components in each axes. This leads to jagged diagonal lines. This is called aliasing as the higher frequencies have an alies as lower frequencies.
So when you apply antialiasing in video games it’s doing math to smear the signal along the two axis of the display. This makes a cleaner looking line.
I love the small insights into signal theory/processing generated by this image, this is really cool stuff! Thank you for chiming in.
Little nitpick to you:
Nyquist will ensure that you preserve artifacts that indicate primary frequency(ies) of interest, but you’ll lose nuance for signal analysis.
When we’re analyzing a signal more deeply we tend to use something like 40x expected max signal frequency, it’ll give you a much better look at the signal of interest.
This is because your signal of interest, unless purely sinusoidal, has higher frequency features such as harmonics, so if you sample at Nyquist you’d lose all of that. Nyquist theorem still stands, it’s just you wanna look at higher frequency than you realize because you wanna see higher frequency components of your signal.
Thanks! Your nitpicking is most welcome.
Double nitpick, according to Wikipedia, your definition is a “minority usage”. I teach signal Processing and hadn’t heard of that one, so thanks for pointing me to it!
Nyquist as half sampling rate is what I use
https://en.m.wikipedia.org/wiki/Nyquist_frequency#Other_meanings
Neat! I’ve definitely originated misunderstandings based on that. I wonder if it comes from my signals class lol
Why is this called a “theorem”? It feels like a rule of thumb instead
It comes from mathematical interpolation. In order to find the frequency of a sine curve (and all signals are combinations of sine curves) you need at least two measured points per period. So the measurement frequency needs to be at least twice the signal frequency - at least of the parts of the signal you want to preserve. Frequencies higher than 22kHz are useless to our ears, so we can ignore them when sampling.
https://en.m.wikipedia.org/wiki/Nyquist–Shannon_sampling_theorem
That water looks all weird and wrong.
Agreed, it’s usually not that spiky
Looks like matted fur.
Or a wheatfield, definetly not water though…
I just had like three rounds of “Oh wow that’s more interesting than I thought” back-to-back.
Just a minor addendum, 44.1 kHz wasn’t really ideal for human hearing; it’s not quite double the highest audible frequency for a lot of humans. The frequency was chosen for audio CDs because the data was recorded onto U-Matic video cassette tapes for duplication (if you watched the tapes back connected to a TV it looks like a black and white checkerboard but the squares switch rapidly and randomly) and 44.1 kHz was the most that could reliably fit on the tape. It worked well enough since most of the sounds recorded are under 22 kHz, but it’s a contributor of why some people say CD audio isn’t as good as a high-quality analog recording. A lot of non-CD digital audio like the audio for digital video or higher resolution digital audio prefers 48 kHz or a multiple of that, like 96 or 192 kHz.
I don’t have the time to write a well thought out reply, but CDs trump cassettes in terms of both dynamic range and noise floor. Records are worse than cassettes in both categories. I would personally trade a small amount of frequency response for the other two.
That said, people are… well people. Do what makes you happy.
I think the people who make those claims are usually referring to vinyl records, not cassettes. That said, I would not be surprised if the people who claim they can hear a difference are mostly imagining it. Or perhaps it’s something that dates back to the early days of CDs when the equipment and mastering techniques were not as good as they became later in the ’90s/’00s, not something applicable today.
This one is excellent
Thanks, I agree, it’s one of my favorite shots from this camera.
In addition to scanning left to right, your scanmra must also have a decent readout delay for a given horizontal location top to bottom (or bottom to top?).
Excellent photo, as always. Water is a excellent subject for this type of camera. I wonder what a busy road at night would look like.
As for busy road at night, I’m afraid that with this way of doing scanning photography it would be quite uninteresting. The motion is way too quick, and cars would render as with either weird vertical lines or very small diagonal squiggles, depending on which direction you scan.
I suggest looking up some talks by the Italian photographer Adam Magyar, he’s done some great talks on transchronologal (?) photography, and is a great artist himself.
I haven’t really considered that, I’m assuming the (in this case) vertical sampling is ‘global’, as in the values at each sensor site is locked at the same time and then read out from the serial bus.
If there was a delay, stuff like fluorescent lighting would read as a moire pattern, but I’ve only ever encountered streaking/linear distortion in those circumstances.
I think the ‘griddyness’ or general sense of direction in the water is purely a function of how water moves and not a result of readout delay.
I’d love to be proven wrong, though, so if I can do some experiment to determine either way, I’m all ears.
